13
6.2. Rear Panel Explained
7
10
7
12
7
11
7
17
7
13
7
14
7
18
7
20
7
15
7
16
7
19
79
9. Mains Power Connection
The IEC connector supports a range from ~95-245 V. This enables the device to
automatically accommodate mains voltage in every country.
10. Word Clock Input
BNC connector used to accept Word Clock reference.
11. 10M Input
This BNC Input Connector allows the Orion32 HD to receive timing reference from an
Atomic Clock such as the Antelope 10M and 10MX, to increase the Oscillator accuracy.
If the device is in Oven mode, plugging in the atomic clock causes the “Atomic LED” light
to illuminate on the device front panel and the atomic device becomes the primary timing
reference, thus providing better sample accuracy, more detailed sound and greater
stability.
12. Word Clock Outputs
Two Word Clock Outputs with BNC connector.
13. S/PDIF Input/Output
75
Ω
S/PDIF connectors for use with compatible equipment.
14. Monitor Outs
Assignable stereo output.
15. HDX ports
Enables you to connect your Orion32 HD to an HD system (cable not included).
16. ADAT Connectors
2 Inputs & 2 Outputs (up to 8 channels per line).
17. MADI Input/Output
1 x MADI I/O Connector providing 64 tracks input and 64 tracks output.
18. USB3 port
Orion32 HD uses USB3 connector and supports up to 192kHz sample rate.
19. Analog Line Outputs (top)
Four D-SUB 25 connectors enable you to attach breakout cables, each with 8 lines.
20. Analog Line Inputs (bottom)
Four D-SUB 25 connectors enable you to attach breakout cables, each with 8 lines.
Summary of Contents for Orion32 HD
