sophisticated stereo and 360° sound recording.
2. Safety Notes
Phantom power – ensure phantom power supply is 48V.
3. Connecting Edge Quadro
The Edge Quadro comes with 2 Y cables. Each of them has a 5 pin XLR female on one end and two 3 pin XLR male
connectors on the other.Each of the cables is market receptively for the bottom and top head(B and T). Labelling on the
inputs of the mic are also provided so that the user knows where each Y cable needs to be connected.Colouring on each
cable shows the sides of each channel. White for Left and Red for Right. Respectively, the left channels are the front
membranes for each head.
4. Claim and assign features
Claiming features:
Open www.antelopeaudio.com
(http://www.antelopeaudio.com)
and click LOGIN.
Enter your credentials and password
Navigate to Claim Features
Enter the voucher code ME*****, mark the checkbox on the End Users License Agreement and click “Claim”
Assigning features:
Open the interfaces Control Panel and go to the Help tab (the “?” button)
Open the Administration panel
Mark “Register device and assign features” and continue
Mark the checkbox with the Microphone Emulations and continue
The device will restart and your new Mic Emulations will be available.
5. Load a Mic Emulation in your AntelopeAudio Interface.
Open the interface Control Panel and click on the little settings icon on the preamp gain control.
To have access to the mic settings, the input should be in Mic mode.