![Antec P380 User Manual Download Page 9](http://html1.mh-extra.com/html/antec/p380/p380_user-manual_2947138009.webp)
9
2.1
Setting Up
Put the case upright on a flat, stable surface so that the side
panel is facing you. To remove the left and right side panels,
remove these thumbscrews first.
Note
: Place the panel thumbscrews aside carefully and
remember where they are.
Remove the panel by gripping the end of the panel at the top &
bottom and swinging the panel outward. Do not pull the panel
back toward the rear of the chassis.
Note:
Please be careful when removing the plastic film from the side
window so as to avoid the window falling-down.
Remove the panel by the end of the panel at the top & bottom and
swing the panel outward.
CAUTION
Do not use your fingernails to pry or lift the panels. Damage to the
panels or injury to your fingernails may result.