26
4.2
Optional Fans
The P380 includes mounts for up to three more fans. These mounts are as follows:
3 x 120mm/2 x 140mm front intake fan mount
Front intake 120 mm /140mm fans
You can install these fans using 2 of the long screws provided (F in Section 1.3).
How to remove the front panel and install the fan
A.
Loosen six screws, three at each side of the chassis.
B.
Use flathead screwdriver to pull open the front panel.
C.
Align the fan on the mounting holes and using 2 of the long screws provided (F in Section 1.3),
and be sure to screw in the fan in the top-left and lower-right holes first.
(as pictured).
Note: you can install maximum three 120mm fans on the front case.
Top exhaust 120 mm/140mm fans
The P380 includes three 120mm top fan mounts or two 140mm top fan mounts
How to remove the top cover
A.
Screw off two screws located on the rear of top
cover.
B.
Slide the cover back toward the rear of the chassis.
C.
Align your fan with the pegs that correspond
with the fan screw holes on the fan.
D.
Push your fan into the slot until secure. You will
hear your fan lock into place when the brackets
around the fan snap into place.
A
B
C
