Antari Z-Stream, User Manual

Page: 7 / 12

7

Remove all packing materials from the fog machine. Check that all foam and plastic padding is
removed, especially in the nozzle area.

Fill with high-quality water-based fog fluid. Any other types of fluid can damage the unit. When
filled, place cap back on the liquid tank.

Firmly connect the remote control to the proper input on the rear of the machine.
Operation

Plug power cord into a grounded electrical outlet. Then turn on the power switch on the rear of the
unit. The machine starts to warm up right away. At the same time, the
“Ready” (Green) and
“Power” (Red) lamps on the timer remote control will flash. When warm-up is complete the Green
and Red lamps will stay lit.

To emit fog, press the Green button on the remote and hold for the desired length of time.

The output will stop when the unit needs to reheat, and the
“Ready” (Green) and “Power” (Red)
lamps on the timer remote control will flash.

To activate the timer function, turn the knob from off to on and adjust the knob to the length of time
for
“INTERVAL” needed.

When the timer function is activated, the
“Timer” (Yellow) lamp will be on and the “OUTPUT” time
is fixed to 15 seconds.
Remote Control Operation

VR-1T:
3 meter wire timer remote controller with 1/4 inch stereo plug.