5
Operation
Important:
Always monitor tank fluid level as you are fogging. Running a fog
machine with no fluid can permanently damage the unit.
!
Plug
power
cord
into
a
grounded
electrical
outlet.
T
urn
power
switch
on
rear
of
unit
to " ON"
position.
Warm-up
is
complete
when
the display
on
control
module shows " Ready to Faze."
!
To
emit
fog,
press
the
appropriate
button
on
the
control module
for
the
desired
length
of
time.
!
Loosen the screws on the two sides of the vent to adjust
output angle as desired.
!
The control
unit's
display
will
cycle
" Warming up"
and
" Ready to Faze "
as
the
machine
re-heats
to
the
proper
operating
temperature.
!
When the fluid is running low, the LED inside the tank
chamber starts blinking for two minutes and then stop
operation to protect the pump from running dry..
!
Always monitor liquid level to prevent interrupted
operation.
!
For
further
information
on
operating
your
ANTARI
X
Fazer,
see
the
section
titled, "Control Module
Operation" on page 6.
If
your
model
includes
a
mounting
bracket
designed
for
overhead
installation,
it
may
be
installed
at
floor
level
or
suspended
overhead.
If
the
unit
is
to
be
mounted
using
the
bracket,
it
is
important
that
the
fog
does
not
shoot
directly
at
any
one's
face.
Whatever
installation
method
you
choose,
do
not
allow
the
unit
to
have
more
than
a
15
degree
angle
of
inclination.
Summary of Contents for X FAZER
Page 15: ......
