ANTARI X-20 DMX Module Settings
If
Channel
has
a
value
from
0
to
5,
the
unit
is
OFF.
If Channel has a value from 250 TO 255, the machine will operate
at maximum output.
On X Fazer such as X-510, X-515 and X-530, X-20 uses only 1
channel to control volume output operation. On X Fazer such as
X-310, X-20 uses 2 channels to control both fog volume and fan
volume. Whatever channel you select on the unit, the channel
next to it will be selected automatically for fan volume control.
Each channel has a value range of 0 to 225. Timer functions such
as duration and interval can be programmed using the DMX
controller or the DMX control software being used by lighting and
effects operator.
Between
the
values
6
to
249
the
volume
of
fog
output
is
regulated. With 6 being the minimum volume of fog produced and
249 approaching the maximum. The volume output rises as the
DMX value is increased.
Note
: In the example above, if the machine were assigned the
DMX address of 124, Channel would correspond to DMX address
124.
0 - 5
6 - 249
250 - 255
OFF
Volume Control( 5% - 95%)
Maximum Volume Output ( 100%)
Value
Function
9
Summary of Contents for X FAZER
Page 15: ......
