Antari W-715 Fog Jet, User Manual

Page: 7 / 40

7
Duration Time Setup -
Press the [Menu] button until the LCD screen displays
“
Duration
Set
”
and press the
▲
or
▼
button to set the duration time from 2-15 seconds.
Output Volume Setup -
Press [Menu] until the LCD screen displays
“
Timer Output
”
and
press the
▲
or
▼
button to set the output percentage from 50-100%.
After finishing the above setting, go back to the main screen by pressing the [Stop] button.
To activate Timer Mode , press the [Timer] button below the display. To deactivate Timer
Mode , press [Stop] button.
Volume Operation
To operate the machine in
Volume Mode
, the output volume under
Volume Mode
must be
set first:
Output Volume Setup -
Press the [Menu] button until the LCD screen displays
“
Volume
Output
”
and then press the
▲
or
▼
button to set the output percentage from 50-100%.
After finishing the above setting, go back to the main screen by pressing the [Stop] button.
To activate Volume Mode , press the [Volume] below the display. To deactivate Volume
Mode , press the [Stop] button.
Note: In Volume Mode, the machine emits fog continuously until a re-heat is needed.
2-Second Jet Operation
To activate
2-Second Jet Mode
, press the [Menu] button until the LCD screen displays
“
2-Second Jet Output
”
and then press the
▲
or
▼
button to activate or deactivate
2-Second Jet Mode . Once the 2-Second Jet Mode is activated, the main screen will keep
showing
“
2-Sec Jet Mode
”
. Press the [Volume] button and the fog will be emitted for 2
seconds with maximum output (100%).
DMX Operation
Making the DMX Connection
– Connect machine to a DMX controller or to one of the
machines in the DMX chain. The machine uses an 3-pin and 5-pin XLR connector for DMX