Ordercode: 60899
Antari IP-1500
Data Cabling
To link fixtures together, you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable,
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio DMX Data Cables
•
DAP Audio Basic microphone cable for allround use. bal. XLR/M 3-pin > XLR/F 3-pin.
Ordercode FL01150 (1,5 m), FL013 (3 m), FL016 (6 m), FL0110 (10 m), FL0115 (15 m), FL0120 (20 m).
•
DAP Audio X-type data cable XLR/M 3-pin > XLR/F 3-pin. Ordercode FLX0175 (0,75 m),
FLX01150 (1,5 m), FLX013 (3 m), FLX016 (6 m), FLX0110 (10 m).
•
DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5 m), FL713 (3 m), FL716 (6 m), FL7110 (10 m).
•
DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m).
•
DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m),
FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m).
•
DAP Audio DMX adapter: 3-pin/5-pin. Ordercode FLA30.
Control Panel
The Antari IP-1500 can be operated with a light controller in control mode or without the controller in
stand-alone mode.
A) LCD display
B) FUNCTION button
C) TIMER button
D) VOLUME button
E) STOP button
Fig. 07
Control Mode
The fixture is individually addressed on a data-link and connected to the controller.
The fixture responds to the DMX signal from the controller. (When you select the DMX address and save it,
the controller will display the saved DMX address, next time.)
DMX Addressing
The control panel on the front side of the base allows you to assign DMX fixture address, which is the first
channel with which the Antari will respond to the controller.
Please note, when you use the controller, the unit has 1 channel.
Controlling:
Note: After switching on, the Controller will automatically detect whether DMX 512 data is received or
not.
If DMX signal is not received, the problem may be:
•
The XLR cable from the controller is not connected with the input of the Antari IP-1500.
•
The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
10
Summary of Contents for IP-1500
Page 18: ...Ordercode 60899 Antari IP 1500 Dimensions 17...
Page 19: ...Ordercode 60899 Antari IP 1500 18...
Page 20: ...2015 Antari...
