Antari FT-55, User Manual

Page: 8 / 12

8
Aerosols
Only use Antari FLP-700 aerosol for the FT-55 Fire Training
Fog Machine.
The machine is tested and calibrated with this aerosol to get the
best output performance. Warranty will be voided if any other
type of aerosol is used, improper use of aerosol may lead to
machine failure or malfunction.
Service and Maintenance
․
Do not allow the machine to become contaminated.
․
Remove dust from air vents with air compressor, vacuum or a soft brush.
․
Only use a damp cloth to clean the casing.
․
Before storing run distilled water through the system to help avoid condensing the pump
or heater.
․
It is recommended to run the machine on a monthly basis in order to achieve best
performance and output condition.
․
Excessive dust, liquid and dirt built up will degrade performance and cause overheating.
Breaker Reset
Disconnect AC power before resetting the breaker. Only replace fuse with same
type and rating.
Step 1: Disconnect AC power.
Step 2: Flip breaker to ON position.
Step 3: Turn on machine for testing.