Antari FT-55, User Manual

Page: 6 / 12

6
requirement for the machine refer to the label on the back of the machine.
Always connect the machine to a protected circuit and ensure it is properly
grounded to avoid risk of electrocution.
Step 4: Turn on the machine and allow it to heat up. Heat up takes approximatly 7.5 mintues.
Once the machine has reached operating temperature, the LED inidcator located in the back
panel will turn solid green. Now the machine is ready for operation.
Step 5: To start making fog, press and hold the push button on handle bar, release to stop.
Step 6: To adjust output volume, rotate the knob located in back panel. Turn
counter-clockwise to increase, clockwise to decrease.
Step 7: To turn off the machine, flip the power switch to OFF position. Remove aerosol and
power cord.
FC-1 Remote Control Operation
To operate the machine by remote control, connect the remote to the rear of machine. Press
and hold the button to activate, release button to stop.
Note: Remote control operation only available when the machine is connected to a main
power source.