Antari F-80Z, User Manual

Page: 8 / 24

8
immediately. Check fluid level, the external fuse, remote connection, and power from the wall. If all of
the above appears to be O.K., plug the unit in again. If fog does not come out after pressing the
remote button for 30 seconds, check the hose attached to the tank to make sure there is fluid going
through the hose. If you are unable to determine the cause of the problem, do not simply continue
pushing the remote button, as this may damage the unit. Return the machine to your Antari dealer.
Performance Notes

All fog machines develop condensation around the output nozzle. Because this may result in
some moisture accumulation on the surface below the output nozzle, consider this
condensation when installing your unit.

Fog machines may sputter small amounts of fog occasionally during operation and for a minute
or so after being turned off.

All fog machines have a recycling period after bursts of fog when the machine will shut itself
down for a short period in order to heat back up. During this time no fog can be produced.

Only for liquids with certified suitability.
Save these instructions