Complete inspection.
In case of complete
inspection or of the
substitution of parts, it is
necessary to lift the self-
tailing disks to check the
good state of the springs,
spacers and pawls.
See also exploded view
drawings at section 7.
Cleaning.
Now, simply remove the
center rod.
Clean the old lubricant
from all parts. Lift the roller
bearings, the spacers (in
case of presence) and the
washers. Carefully clean
all these parts with a soft
bristle brush and solvent.
The cleaning of the gear
section and of the gears at
the base of the center rod
does not require further
dismanteling. It will be
enough to use a soft bristle
brush and solvent.
4
3
XT 16, XT30
Installation and Maintenance
10
