Mounting the winch and
orientation of the ST arm.
Once you have fixed the winch skirt
in the correct position, re-insert the
drum.
The XT winches accept a number
of possible positions of the drum.
Choose the desired rotation of the
drum based on the orientation of the
ST arm. The orientation of the ST
arm depends on where you want to
gather the maneuver.
Once the drum is positioned, tighten
the upper ring.
Fixing the skirt.
Once you have determined the
location of the skirt on the deck (see
p.5), you can drill the anchoring
holes. To determine the position
of the holes, mark the deck using
the winch’s skirt’s holes directly.
Alternatively, you can download the
drilling templates from the internet,
at www.antal.it
Then drill the deck.
In order to prevent water seepage,
put sealant around the anchoring
holes. Be careful not to obstruct with
the sealant the drainage channels
at the bottom of the winch.
Thus, tighten the bolts.
3
2
XT 16, XT30
Installation and Maintenance
7
