LNX-602N User’s Manual
Antaira Technologies, LLC
25
RSTP Setting interface
The following table describes the labels in this screen.
Label
Description
RSTP mode
You must enable or disable RSTP function before configuring the
related parameters.
Priority (0-61440)
A value used to identify the root bridge. The bridge with the
lowest value has the highest priority and is selected as the root.
If the value changes, you must reboot the switch. The value
must be multiple of 4096 according to the protocol standard rule.
Max Age (6-40)
The number of seconds a bridge waits without receiving
Spanning-tree Protocol configuration messages before attempting
a reconfiguration. Enter a value between 6 through 40.
Hello Time (1-10)
The time that controls switch sends out the BPDU packet to check
RSTP current status. Enter a value between 1 through 10.
Forwarding Delay
The number of seconds a port waits before changing from its
