83
RSTP System Configuration interface
RSTP - Port Configuration
You can configure path cost and priority of every port.
Select the port in the port column field.
Path Cost:
The cost of the path to the other bridge from this transmitting bridge at
the specified port. Enter a number 1 through 200,000,000.
Priority:
Decide which port should be blocked by priority in LAN. Enter a number 0
through 240 (the port of the highest value will be blocked). The value of priority must
be the multiple of 16.
Admin P2P:
Some of the rapid state transactions that are possible within RSTP are
dependent upon whether the port concerned can only be connected to exactly one
other bridge (i.e. it is served by a point-to-point LAN segment), or can be connected
to two or more bridges (i.e. it is served by a shared medium LAN segment). This
function allows the P2P status of the link to be manipulated administratively. True is
