ANTAIRA LNP-0500G Series, User Manual

Page: 16 / 20

Antaira Technologies - Industrial Ethernet Switches
LNP-0500G Series User Manual V1.0
12
4. Hardware Installation
4.1 Installation Steps
This section will explain how to install Antaira
Technologies’ LNP-0500G (T): 5-port industrial
gigabit PoE+ unmanaged Ethernet switch with 4*10/100/1000Tx (30W/port) and
1*10/100/100Tx port.
Installation Steps
1. Unpack the industrial Ethernet switch from the original packing box.
2. Check if the DIN-Rail bracket is screwed on the industrial Ethernet switch.

If the DIN-Rail is not screwed on the industrial Ethernet switch, please refer to the
DIN-Rail Mounting section for DIN-Rail installation.

If it is required to wall mount the industrial Ethernet switch, please refer to the Wall
Mounting section for wall mounting installation.
3. To hang the industrial Ethernet switch on a DIN-Rail or wall, please refer to the Mounting
Installation section.
4. Power on the industrial Ethernet switch and then the power LED light will turn on.

For the help on how to wire power, please refer to the Wiring the Power Inputs
section.

Please refer to the LED Indicators section for LED light indication.
5. Prepare the twisted-pair, straight-through category 5 cable for Ethernet connection.
6. Insert one side of the RJ-45 cable into the
switch’s Ethernet port and on the other side into
the networking device’s Ethernet port, e.g. switch PC or server.

The Ethernet port’s (RJ-45) LED on the industrial Ethernet switch will turn on when
the cable is connected to the networking device.

Please refer to the LED Indicators section for LED light indication.
7. When all connections are set and the LED lights all show normal, the installation is complete.