Antaira Technologies - Industrial Ethernet Switches
LMP-1600G-M12-67-24 Series - Hardware Manual - v1.0.1
Table 2.2 - Ethernet port pinouts
Note:
“+” and “-” signs represent the polarity of the wires that make up each wire pair.
●
Connection of Cables
Use the twisted-pair cable, category 5e or the above cabling for M12 port connections. The cable between the Ethernet
switch and the link partner (switch, hub, workstation, etc.) must be less than 100 meters (328 ft.) long.
○
Minimum Wire Gauge: 24AWG
○
Maximum Transmission Length: 100m (328ft)
Caution:
Please use copper conductors only.
Attention:
Veuillez utiliser uniquement des conducteurs en cuivre.
Caution:
Use conductors with insulation rated for at least 60°C.
Attention:
Utilisez des conducteurs dont l'isolation est d'au moins 60°C.
Caution:
Base the conductor ampacity on a maximum termination temperature of 60°C.
Attention:
Basez l'intensité du conducteur sur une température de terminaison maximale de 60°C.
2.6 USB Port
●
It is a M12 4-Pin A-Coded female connector
●
USB Port is for configuration backup / restore
●
M12 connector
M12 4-Pin A-Coded female connector
Pinouts
Function
1
DN
2
VBUS
3
GND
4
DP
Table 2.3 - USB port pinouts
