ANTAIRA LMP-1202G-SFP Series, Hardware Manual

Page: 6 / 19

Antaira Technologies - Industrial Ethernet Switches
LMP-1202G-SFP Series Hardware Manual V1.2
2
 IEEE802.1q VLAN tagging, port-based VLAN support

IGMP snooping v1/v2, IGMP filtering / throttling, IGMP query up to 256 group

Supports IPv4/IPv6, RMON, MIB II, port mirroring, event syslog, DNS, NTP/SNTP,
HTTPS, SSH/SSL, TFTP

MODBUS TCP for SCADA system integration
Port Configuration 

Status, statistics, mirroring, rate limiting, event syslog
Event Handling 

Event notification by Email: Cold/Warm Start, Power Failure, Authentication, SNMP
trap and Fault Alarm Relay Output
Software Upgrade via TFTP and HTTP 
Configuration Backup – USB Port

1.3 Product Hardware Features
System Interface and Performance

 All RJ-45 ports support Auto MDI Function

Embedded 8*10/100/1000Tx (PSE 30W/Port), 2*10/100/1000Tx (Non-PoE) RJ45 Ports
and 2*100/1000 SFP slots for fiber
 Store-and-forward switching architecture

8K MAC address table

Power line EFT protection: 2,000VDC; Ethernet ESD protection: 6,000VDC
Power Input 

DC 48~55V redundant with a 6-pin removal terminal block

One user programmable alarm relay contact
 The power input specification is complied with the requirements of SELV (Safety Extra Low
Voltage), and the power supply should be complied with UL 61010-1 & UL 61010-2-201
Operating Temperature


Standard operating temperature models: -10°C to 70°C
 Extended operating temperature models: -40°C to 75°C
Case/Installation


IP-30 protection metal housing

DIN-Rail and wall mount design
 Installation in a Pollution Degree 2 industrial environment