Antaira Industrial Ethernet Switches
LMP-0601G-SFP Series User Manual V1.1
77
7. Technical Specifications
Table 7.1 has the technical specifications for Antaira’s LMP-0601G-SFP series: 6-port industrial
PoE+ gigabit managed Ethernet switch with 4*10/100/1000Tx (30W/Port), 1*10/100/1000Tx
Ethernet Ports, and 1*100/1000 SFP slot.
Standards
IEEE 802.3
10Base-T 10Mbit/s Ethernet
IEEE 802.3u
100Base-Tx, 100Base-Fx, Fast Ethernet
IEEE 802.3ab
1000BaseT Gigabit Ethernet
IEEE 802.3z
Gigabit Fiber
IEEE 802.3x
Flow Control for Full Duplex
IEEE 8023.af
Power-over-Ethernet
IEEE 802.3at
Power-over-Ethernet Plus (Enhanced)
IEEE 802.1d
STP (Spanning Tree Protocol)
IEEE 802.1w
RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s
MTP (Multiple Spanning Tree Protocol)
ITU-TG.8032 / Y.1344
ERPS (Ethernet Ring Protection Switch)
IEEE 802.1q
Virtual LANs (VLAN)
IEEE 802.1x
Port based Network Control, Authentication
IEEE 802.1ad
Stacked VLAN, Q-in-Q
IEEE 802.1p
QoS/CoS Protocol for Traffic Prioritization
Switch
Protocol
CSMA/CD,IGMPv1/v2,SNMPv1/v2,TFTP,SNTP,SMTP,RARP, Syslog
Data Process
Store and Forward
Transfer Rate
14,880 pps for 10Base-T Ethernet port
148,800 pps for 100Base-TX Fast Ethernet port
1,488,000 pps for 1000Base-TX Gigabit Ethernet port
Packet Buffer
1Mbits
MAC Table
8K
Jumbo Frame
9.6K
Flow Control
IEEE 802.3x for full duplex mode, back pressure for half duplex mode
VLAN Groups
0 ~ 4094
IGMP Groups
Up to 256
Port Interface
Ethernet (RJ45) Port
4*10/100/1000BaseTx (PSE: 30W/Port), and 1*10/100/1000Tx;
auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X
connection
PoE Pin Assignment
V+, V+, V-, V-, for pin 1, 2, 3, 6 (Endspan, MDI Alternative A)
Fiber Port
1*Dual Rate (100/1000) SFP Slot
Wavelength
Refer to SFP Modules
RS232 Serial Console
1*RS232 in RJ45 connector with console cable, 115.2Kbps, 8,N,1
Configuration Backup
1*USB 2.0