Antaira Technologies - Industrial Media Converter
IMC-C1000-SFP Series User Manual V1.2
11
3.2 Wall Mounting
Follow the steps below to mount the industrial Ethernet media converter using the wall mounting
bracket as shown below in Figure 3.4.
1. Remove the DIN-Rail bracket from the industrial media converter by loosening the screws.
2. Place the wall mounting brackets on the top and bottom of the industrial media converter.
3. Use the screws to screw the wall mounting bracket on the industrial media converter.
4. Use the hook holes at the corners of the wall mounting bracket to hang the industrial Ethernet
media converter on the wall.
5. To remove the wall mount bracket, do the opposite from the steps above.
Below, in Figure 3.5 are the dimensions of the wall mounting bracket.
Figure 3.4
Remove DIN-Rail Bracket from the Media Converter
Figure 3.5
Wall Mounting Bracket Dimensions
