ANTAIRA IMC-C1000 Series, Hardware Manual

Page: 10 / 22

Antaira Technologies - Industrial Media Converters
IMC-C1000-XX Series - Hardware Manual - v1.2
2.4 LED Indicators
There are LED light indicators located on the front panel of the industrial media converter that display the power status
and network status. Each LED indicator has a different color and has its own specific meaning, see below in Table 2.1.
LED Color Description
PWR Green
On Power Input 1 or 2 is active
Off Power Input 1 and 2 are inactive
GFX L/A Green
On Connected to network at 1000Mbps
Flashing Networking is active
Off Not connected to network
LAN Port
(Upper LED)
Green
On Connected to network, 1000Mbps
Flashing Networking is active
Off Not connected to network
LAN Port
(Lower LED)
Green
On Connected to network, 10/100Mbps
Flashing Networking is active
Off Not connected to network
Table 2.1 - LED Indicators
Note: “PWR” is the abbreviation for “Power”, “GFX” is for “Gigabit Fixed Fiber port”, and “L/A” is for “Link/Activity”.
2.5 DIP Switch Setting
By default setting, DIP switch 1 and 2 is ON. There are 2 pins on the DIP switch on the front panel for setting the LFP (Link
Fault Pass) function, see Table 2.2 below for more details.
DIP Switch 1 DIP Switch 2 Function Description
ON OFF LFP function enable
OFF OFF LFP function disable
Table 2.2 - DIP Switch Settings
Caution: If changing the current DIP switch setting, the device should be powered off and then powered on
again to make the setting effective.
5