Antaeus TALOS 55, Operating & Maintenance Manual

Page: 29 / 53

ANTAEUS TALOS 55
VIII. ORDERING PARTS
D. PARTS IDENTIFICATION
1. Parts lists and drawings are included on the following pages for the equipment
components shown below:
Talos 55 VIBRATOR 1175065
a. ROTOTILT ASM w/ CYLINDERS & MOTOR 1173043
b. ROTOTILT MULTI ATTACHMENT 1150661
c. ROTOTILT ROTOR SUB-ASM 1150662
d. UPPER ARM SUB-ASM 1150323
e. LOWER ARM SUB-ASM 1150325
f. BOTTOM CLAMP SUB-ASM 1810892
g. GEARBOX / FRAME SUB-ASM 1810899
h. POSITECH ROTARY MANIFOLD 1173045
i. VIBRATION SUPPRESSOR / YOKE 1150349
j. ARM CYLINDER ASM 1810897
k. HOSE KIT 1810902
l. FITTING KIT 1810906
m. BOLT KIT 1810903
n. BOTTOM CLAMP SEAL KIT 1208010
o. ARM CLAMP SEAL KIT 1810905
EXCAVATOR-MOUNTED PARTS 1175067
a. JOYSTICK 1150383
b. J-BOX & RELAY PANEL 15770-5301-D
c. FOOT PEDAL
c. HYDRAULIC CONTROL MANIFOLD 1173049
e. MOUNTING BRACKETRY 1150401
2. The spare parts list SECTION VIII - RECOMMENDED SPARE PARTS contains
spare parts which may be very useful in keeping down-time to a minimum,
especially in remote or secluded job sites where unforeseen communication
problems could cause delay of the delivery of an awaited part.
These RECOMMENDED SPARE PARTS may be ordered beforehand,
individually or as a package group as shown in the PARTS LIST.
VIII-2