Antaeus TALOS 55, Operating & Maintenance Manual, Page: 28 / 53

ANTAEUS TALOS 55
VIII. ORDERING PARTS
A. PROCEDURE
1. When ordering parts, be sure to include the model and serial number of the unit or
component. The serial number may be located by referring to SECTION VII, SERIAL
NUMBER LOCATION. Confirm all telephone orders, in writing immediately to
avoid duplicating shipment.
2. ORIGINAL EQUIPMENT; Where component serial numbers are given, these apply only
to equipment and components originally furnished with the unit. Where equipment
has been changed or upgraded these numbers may not be an adequate description.
3. SHIPMENT; State to whom shipment is to be made and method of shipment desired,
otherwise our own judgment will be used.
4. SHORTAGES; Claims for shortages or errors should be made immediately upon receipt
of parts. No responsibility will be assumed for delay, damage or loss of material while
in transit. Broken, damaged or lost material should be refused or a full description
made of damage or loss to the carrier agent on the freight or express bill.
5. RETURN OF PARTS; If for any reason you desire to return parts to the factory or to any
distributor from whom these parts were obtained, you must first secure permission to
return the parts. Shipping instructions will be given along with this permission. A ten
percent handling charge must be assessed against the returned shipment unless an
error is made by the factory or by the distributor when filling your order.
VIII-1