ENGLISH
UNO G8 Series
| User manual
4
5
User manual
|
UNO G8 Series
Series
1
|
INTRODUCTION
Thank you for choosing a
A.N.T
–
Advanced Native Technologies
– product!
In
UNO G8
wireless system series we have put our passion and our technological
background gained over the years, to offer products that meet your needs,
maintaining the quality over time.
UNO G8
wireless system operate in UHF band with 192 channels (frequencies)
in 1785 - 1800 MHz band.
Both versions are characterized by natural sound, wide dynamic range, excellent
signal-to-noise ratio and low harmonic distortion values.
UNO G8
receivers adopt True Diversity Technology, i.e. are equipped with two
discrete antennas, A and B, which are used to select, at any moment, the best
radio signal. Both the handheld microphone and the beltpack transmitter are
equipped with an LCD showing the channel, the group and a number of functions
including battery status and MUTE.
Please, dedicate some minutes to read this instruction manual in order to quickly achieve
the best performances from this product.
For safety precautions, warranty and disposal, please refer to attached Section 2.
For further information about all
A.N.T
products catalog, please visit our website:
www.ant-intomusic.com
2
|
DESCRIPTION
1
4
2
6
3
5
7
FRONT PANEL
2.1
|
RECEIVER - UNO G8R
1 POWER
Press this button on receiver front panel for 1” to turn ON/OFF the unit.
2 ASC
Press this button to achieve automatic channel (frequency) synchronization
via infrared.
3 IR WINDOW
It allows the synchronization of the channel (frequency) with the transmitter.
After pressing the ASC button, place the handheld wireless microphone or
beltpack transmitter close to this window and wait for the selected channel to
stop flashing on the display. After few moments the synchronization process
ends, and the RF signal level indicator will show the presence of signal.
ATTENTION: Always apply this procedure within 10” from transmitter
powering.
4 SET
Press this button to access to setups, select functions and set receiver
parameters values. Pressed for 2” this button allows to deactivate the
automatic “lock” feature of receiver controls.
5 UP
Use this button to select values, including volume 63 steps, or upper values
of any parameter.
6 DOWN
Use this button to select values, including volume 63 steps, or lower values
of any parameter.
7 MULTI-FUNCTION DISPLAY
This LCD shows indicators of audio (AF) and radio-reception (RF) levels,
followed by the indicators of Squelch (SQL), VOLUME, GROUP, CHANNEL,
ANTENNA DIVERSITY, SYNC and the lock icon.
