ENG
LISH
B-TWIG 8
| User manual
6
7
User manual
|
B-TWIG 8
11 CHANNEL 3 LEVEL
This control adjusts channel 3 level. Turn the knob clockwise to increase volume,
or counterclockwise to lower it.
12 MIX OUT
XLR-M balanced output to link to another active system.
This output signal depends on input channel levels as well as by EQ settings.
13 HIGH
High frequency EQ
Use this control to boost or to cut frequencies in med-hi band.
14 LOW
Low frequency EQ
Use this control to boost or to cut frequencies in med-low band.
15 ON/CLIP TWO-COLOR LED
Led lit green: the unit is plugged in and the power switch is turned ON.
Led lit red: Indicates the activation of the internal limiter circuit preventing amplifier
distortion and protecting the speakers against overloads. In this case, reduce the
channel level(sand that of the sound source.
16 SLIDE LOCKING SYSTEM FOR QUICK CONNECTION
This mechanism allows coupling and uncoupling support element to the subwoofer
B-TWIG 8S, ensuring a safe perfect functionality.
17 RECESSED HANDLE
Use this top handle for subwoofer carrying
and positioning. Do not use it to hang the
cabinet or to lock it in any position.
2
3.2
|
POWER SUPPLY SECTION
1 MAINS INPUT
IEC mains socket with integrated EMI filter. Insert the mains cable into
this socket, but make sure the device is switched off before connecting
the cable to the mains. For your safety, never disconnect the earth lead.
2 FUSE
Protection fuse.
CAUTION: Replace the fuse only with one of the same type and with
the same value. If the fuse blows repeatedly, contact an authorized
service center.
3 POWER ON/OFF
Use this switch to turn ON/OFF the unit.
16
17
3
1
