Use the brass fittings from the
toolbox and screw them into
the feet.
The brass fitting will fit firmly
into the lower Rack.
The weight of the top Rack
will make the entire Rack
even more stable for optimum
resonance control.
Fix the screw tightly using the
screwdriver from the toolbox.
The feet of the top shelf will
fit perfectly and add even
more resonance control to
your Rack tower.
Fill the ceramic balls into the
pits of the lower Rack shelf in
all four corners.
BUILDING AN ANSUZ RACK TOWER
The Rack is designed to be set up in a “tower” design
with more shelves on top of each other. Use the brass fit-
tings delivered along with your Rack to fit more shelves.
USING CERAMIC BALLS*
(OPTIONAL)
We recommend building the Rack shelves in “tower”
design using ceramic balls. This set-up will add more
resonance control to your Rack tower.
6
*) can be ordered separately at extra cost
