Begin by removing the small
“toolbox” containing a pair
of protective gloves, three
screwdrivers and some brass
fittings.
Remove the final layer
of foam holding the
preassembled X.
Put on the gloves and remove
the Darkz and titanium
columns. Be careful to keep
the parts from scratching or
bumping into each other.
Before further unpacking,
make sure that the quality
level of the Darkz is identical
to the one you ordered.
Correctly assembled, your X
will look like this.
Mount the titanium columns
to all four corners of the X.
The screws must be firmly
fixed without using any kind
of tools.
Unscrew the top from the
four titanium columns.
ASSEMBLY
Assembling the Rack is quite easy, just follow the steps
as shown. Wear the protective gloves that are provided
for both hands to ensure that the titanium parts will not
become stained.
4
