EN
25
The light turns on and off all
the time.
The light detector is sensing
stray light.
Adjust the light detector’s
settings.
The light is on all night.
1.
There is a heat source
within the light’s
sensor range.
2.
There is a reflective
surface within the
light’s sensor range.
1.
Remove the heat source
or move the light.
2.
Remove the reflective
surface or move the
light.
The motion detector is
activated for no visible reason.
1.
Problem with the
sensor.
2.
A heat source or
a reflective object
appears temporarily
within the sensor
range.
1.
Remove and then
replace the batteries to
reset the sensor.
2.
Point the light in
another direction so
that the sensor range
does not detect the
source of the problem.
The motion detector is not
activated at all.
1.
The batteries are
dead.
2.
The light is turned off
(the knob underneath
the light is set at
”OFF”).
1.
Check or replace the
batteries.
2.
Check the knob’s
setting.
The motion detector is
activated during daytime.
The light detector is set
incorrectly.
Change the light detector’s
setting.
The sensor range is different on
different days.
The weather conditions affect
the light’s function, and if the
weather changes, the sensor
range can increase or decrease
in size.
Adjust the detector’s position.
MAINTENANCE
• If necessary wipe off the light’s casing with a damp, soft cloth. Never use abrasive cleaners.
• Remove the batteries when the light is not going to be used for some time. Leaking batteries
may damage the light.
