Ansult 416120, Operating Instructions Manual

Page: 90 / 98

EN
90
• If the set time for staring or stopping are different for both
timer settings, for example both 1ON and 2ON are 8:00, but
1OFF is 9:00 and 2OFF is 10:00, the heat pump will work
from 8:00 to 9:00.
• If the timer setting is made for heating mode + hot tap
water or c hot tap water, the hot tap water will be
given priority during the overlapping time. Example:
– Two timer settings for hot tap water mode 1ON-6:00
1OFF-10:30, 2ON-16:00 2OFF-22:00
– Two timer settings for cooling mode 1ON-10:00
1OFF-13:00, 2ON-14:00 2OFF-17:00
– The operating modes will then switch as follows:
6:00–10:00 for hot tap water mode, 10:30–13:00 for
cooling mode, 14:00–16:00 for cooling mode,
16:00–22:00 for hot tap water mode. Hot tap water is
therefore given priority during the overlapping time for
hot tap water + cooling. When the set temperature for
hot tap water is reached the heat pump switches to
cooling mode. If the times do not overlap the heat
pump works in the respective modes. The mode hot tap
water + heating works in the same way.