EN
11
replace power switches and wall sockets,
fit plugs, extension cords and light sockets.
Incorrect installation can result in fatal injury
and the risk of fire.
SYMBOLS
Read the instructions.
Only intended for indoor use.
Class III
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage
24 V DC
Output
5 W
Luminous flux
185 lm
Colour temperature
3000 K
Life span
30000 h
Off/On
50000 times
Energy class
E
Dimmable Yes
Protection rating
IP20
Diffusion angle
88°
Length
300 mm
DESCRIPTION
1. Transformer (sold separately)
2. Light (sold separately)
3. Power cord (sold separately)
4. In-line connector (sold separately)
5. Elbow connector (sold separately)
6. Power switch On/Off (sold separately)
SAFETY INSTRUCTIONS
• Only intended for indoor use.
• Do not connect the light to the mains
while it is still in the pack.
• Check that all electrical and connecting
cables comply with the applicable
regulations and that they are connected
in accordance with the instructions.
• Never overload the mains. This can result
in fire or a risk of electric shock.
• Keep out of the reach of children.
• Never fit the light in a damp or very cold/
hot place as this can damage the
electronics in the light.
• The electronics in the light are sensitive to
knocks and blows. Avoid dropping it.
• The light source in this light is not
replaceable. When the light source is
consumed the whole product must be
discarded.
• If the external power cord or wires are
damaged they must be replaced with an
approved cord or wires from the
manufacturer, or an approved retailer.
• Pay attention so that no concealed wires
are damaged in connection with
installation.
• Be careful not to damage the insulation
on the wires during installation. Make
sure that the wires do not come into
contact with sharp edges. Damaged
insulation can result in a risk of electric
shock.
• Do not look directly into the light source.
• Do not connect together more lights than
the transformer has the capacity to
support.
WARNING!
New installations and extensions to existing
installations should always be carried out
by an authorised electrician. If you have
the necessary experience and knowledge
(otherwise contact an electrician), you can
Summary of Contents for 019945
Page 3: ...1 2 3 1 2 3 4 5 6 7 8...
Page 4: ...4 5 6 7 8...
