EN
9
• Check before installing that
there are no concealed
electrical cables that can be
hit by the drill or screws.
SAFETY PRECAUTIONS
• This is not a toy. Do not allow
children to play with, or near
the product.
• Wear safety gloves and
approved safety glasses.
• Only use the product as it is
intended to be used.
• Always check the product
before using it. Do not use
the product if any parts are
loose or damaged, or if the
insulation is damaged.
• Check that the type plate
and all the warning signs are
clean and legible. These
markings contain important
safety information. Contact
the retailer if the type plate
or stickers are missing,
damaged or illegible.
• The plug on the product
must match the power point.
Never modify the plug in any
way. Never use an adapter
SAFETY INSTRUCTIONS
• Install the product in
accordance with these
instructions. Incorrect
installation can result in a
risk of personal injury and/or
material damage.
• Wear safety gloves and
approved safety glasses.
• Keep the installation area
clean and well lit.
• Keep onlookers at a safe
distance from the work area
during the installation.
• Do not install the product if
you are tired or under the
influence of drugs, alcohol or
medication.
• Do not plug in the plug
before the product is fully
installed.
• If the product is installed
where it is difficult to get at
it, it should be connected to
a power point with a switch
so that the power supply can
be immediately switched off
in the event of a fault.
• Install out of the reach of
children.
