background image

EN

11

(otherwise contact an electrician), you can 
replace power switches and wall sockets, 
fit plugs, extension cords and light sockets. 
Incorrect installation can result in fatal injury 
and the risk of fire.

Symbols

Only intended for indoor use.

Risk of electric shock.

Approved as per applicable 
directives.

Recycle discarded product as 
electrical waste.

TECHNICAL DATA

Rated voltage  

230 V ~ 50 Hz

Output  

5 W

Luminous flux 

500 lm

Colour temperature 

3000 K

Life span 

40000 h

Energy class 

A++

Dimmable No
Protection rating 

IP21

Diffusion angle 

320°

Luminous flux retention factor 

0.7

Ambient temperature 

-5 – +35°C

SAFETY INSTRUCTIONS

•  Only intended for indoor use.
•  Do not connect the light to the mains 

while it is still in the pack.

•  Check that all electrical and connection 

cables comply with the applicable 
regulations and that they are connected 
in accordance with the instructions.

•  Never overload the mains. This can result 

in fire or a risk of electric shock.

•  Keep out of the reach of children.
•  Never fit the light on a damp or in a very 

cold/hot place as this can damage the 
electronics in the light.

•  The electronics in the light are sensitive to 

knocks and blows. Avoid dropping it.

•   The light source in this light is not 

replaceable. When the light source is 
consumed the whole product must be 
discarded.

•   If the external power cord or wires 

damaged they must be replaced with an 
approved cord or wires from the 
manufacturer, or a dealer approved by the 
manufacturer.

•  Pay attention so that no concealed wires 

are damaged in connection with 
installation.

•  Be careful not to damage the insulation 

on the wires during installation. Make 
sure that the wires do not come into 
contact with sharp edges. Damaged 
insulation can result in a risk of electric 
shock.

•  Do not look directly into the light source.
•  The minimum safe distance to an 

illuminated object is 10 centimetres.

     WARNING!   
New installations and extensions to existing 
installations should always be carried out 
by an authorised electrician. If you have 
the necessary experience and knowledge 

Summary of Contents for 005579












Reviews: