ANSMANN ALCS 2-12/0.4, Instruction Manual, Page: 9 / 58

After connecting the mains cord and the battery terminal the “POW-
ER” LED and the “CHARGE” LED will lights green.
5. Battery fully charged
Once the battery is fully charged the “CHARGE” LED goes out and the
“FULL” LED will lights green. Unplug the mains cord and afterwards
remove the battery terminals of the battery, first the black terminal
(-) and then the red (+) terminal.
6. Trickle charge
Alternatively, the battery can be left connected for an extended peri-
od (e.g. for the winter). The charger detects any loss of capacity and
recharges automatically.
SPECIFICATIONS
Input Voltage
100-240V AC / 50Hz – 60Hz
Protection class II
Protection IP20
Charge voltage 2V: 2,3V / 6V: 6,9V / 12V: 13,8V
Charging current 400mA
Battery capacity 1,2Ah – 40Ah
DISCLAIMERS
The information in this manual may be amended without notice.
ANSMANN assumes no liability for any direct, indirect, incidental or
consequential damages or any other damages caused by improper
handling or disregard of the information contained in this manual.
WARRANTY INFORMATION
ANSMANN offers a 3 year warranty on this device. No guarantee
will be given on damage to the charger due to non-compliance with
these instructions.
Information subject to change without prior notice. ANSMANN assumes no liability for
printing errors.
08/2013