EN
2
TECHNICAL DATA
Rated voltage
230 V AC / 50 Hz
Output
2 x 20 W
Protection rating
IP44
Socket MR16
Cable length
10 m
DESCRIPTION
INSTALLATION
1.
Lay out the connecting cable. Make sure not to put it where people can trip over it and decide
where the lamps are to be placed along the cable.
2.
Place the plug (do not plug in yet) next to the power point indoors to which the system is to
be connected. The transformer can be placed indoors or outdoors.
3.
If the lamps are to be put on the ground, mount the fittings on the supplied ground spikes.
Push the spikes into the ground and make sure the lamp cables reach the extension cable.
4.
Use the supplied screws if you want to mount the lamps on a wall or on decking (e.g. a
terrace).
