23
9.
Insert the bulb (not included).
10.
Fit the globe and tighten the screws. Do
not overtighten, this could cause the globe
to crack.
Wiring diagram
1.
Green-yellow
2.
Blue
3.
Black
4.
Brown
5.
Earth
6.
Neutral
7.
Live
8.
Hanger
9.
Casing
10.
Mounting plate
11.
Motor
OPERATION
Use
1.
One chain switch controls the light, the other controls the speed.
2.
Pull the chain to adjust the speed as follows. once: high speed, 2 times: medium speed, 3 times:
low speed, 4 times: switched off.
3.
Pull the chain to adjust the light as follows. once: on, 2 times: off.
4.
There is a direction selector on the switchbox, which is adjusted as follows:
Select downward air flow when it is hot.
Select upward air flow to bring down hot air from the ceiling to the floor.
MAINTENANCE
Only use a dry, soft cloth to clean the ceiling fan.
NOTE:
Do not use a wet cloth.
Do not use liquid, abrasive or solvent-based detergents to clean.
Balancing the blades
Irregular rotation can be a result of the blades or blade holders being skew or unevenly positioned, or
because the appliance is incorrectly mounted, or because the bearings are worn or warped. Follow the
instructions below to rectify the problem.
Check that all the blades are firmly mounted on the blade holders.
Check that all the blade holders are correctly mounted on the flywheel with uniform pitch.
