Anslut 408-054, Operating Instructions Manual

Page: 13 / 14

ENGLISH
13
Changing or deleting codes
Deleting a single code:

Press the self-programming button on the receiver for 3 seconds.

The LED will flash slowly (fig. 2).

Press the OFF button on the remote control to delete the programmed code.
TROUBLESHOOTING
The system does not work:

Check the battery in the remote control (transmitter).

Check the code programming.

Delete old codes in the receiver and enter new code.
Jula reserves the right to make changes. In the event of problems, please contact our service
department.
www.jula.com