EN
20
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Safety class II.
WARNING: Do not
cover the heater – risk
of overheating.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Output
1000/2000 W
Cord length
1.4 m
Protection rating
IP20
Size
W22 x H27 x D13 cm
DESCRIPTION
Portable heater fan in versatile format. The fan
has two heating modes, adjustable thermostat
and tip and overheating protection.
1. Handle
2. Thermostat dial
3. Power light
4. Control dial for fan mode
FIG. 1
USE
NOTE:
• When the heater fan is used for the first
time, or when it has not been used for
some time, it is normal for it to smell a
little and emit fumes. This will soon
stop.
• The heater fan has a tilt switch.
To activate the fan it must be placed
on a level surface.
THERMOSTAT
Turn the temperature dial clockwise until it
clicks, this confirms that the thermostat has
activated. Turn the thermostat dial to the
required temperature setting, see section
"Control of thermostat".
Control of thermostat
When the ambient air has reached the
required temperature, turn the thermostat
slowly anticlockwise until the heater fan
switches off and stop in this position.
The thermostat will then maintain this
temperature in the room.
FAN MODES
The control dial has 3 fan modes:
• Fan only without heating ( )
• Low output 1000 W (I)
• High output 2000 W (II)
SWITCHING OFF
1. Turn the control dial to the off position.
2. Turn the temperature dial anticlockwise
all the way.
3. Pull out the plug and allow the product to
cool before putting it away.
OVERHEATING PROTECTION
The overheating protection automatically
switches off the product if it overheats as a
result of incorrect use or if used in very warm
conditions. When the product has cooled it can
be used again.
Summary of Contents for 022709
Page 3: ...1 1 2 3 4...
