EN
4
USE
1.
Plug the charger into a power point. The status
light ON goes on and USB 1 and USB 2 have a
constant output voltage of 5.0 VDC.
NOTE:
The maximum permitted load is 3.1 A.
2.
Press the settings button to set the countdown
time for USB 1. The setting switches between
the modes ON-6H-4H-2H-1H-ON each time the
button is pressed.
3.
When the set time has counted down USB 1 is
without voltage and the status light goes off.
4.
The next time the settings button is pressed the
product is activated with the last setting.
5.
USB 2 always has an output voltage 5.0 VDC.
6.
Connect the product to an easily accessible
power point near the appliance to be supplied
with power.
Summary of Contents for 021124
Page 3: ...1 1 3 4 2...
