EN
11
wires as shown in the figure.
7. Replace the lid and screw in the screws.
8. Reconnect the power supply.
FIG. 1
DISMANTLING
1. Remove the top cover with a screwdriver.
2. Undo the 2 screws on the sides.
3. Release the soldered wire by melting the
solder with a soldering iron.
4. Remove the aluminium cover with a
screwdriver.
5. Release the soldered wire by melting the
solder with a soldering iron.
6. Done!
Summary of Contents for 019960
Page 3: ...1 ...