Anslut 019960, Operating Instructions Manual

Page: 10 / 19

EN
10
Read the instructions.
Only intended for indoor use.
Protective earthing
Non-replaceable light source.
Non-replaceable actuator.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage 230 V ~ 50 Hz
Output 12 W
Luminous flux 900 lm
Colour temperature 3000 K
Diffusion angle 80°
Life span 30000 h
Off/On 15000 times
Safety class I
Protection rating IP20
This product contains a light source of energy
efficiency class <F>.
INSTALLATION
1. Make sure the power supply is
disconnected.
2. Carefully unpack the product.
3. Mark out where to drill the mounting
holes.
4. Drill holes.
5. Hang the cord on the hook.
6. Open the junction box and connect the
SAFETY INSTRUCTIONS
• Only intended for indoor use.
• Switch off the power supply before
installation.
• Do not connect the product to the mains
when it is still in the pack.
• Do not look directly into the light source.
• Do not store the product in a damp or
very cold/hot place, this can damage the
electronics.
• The electronics in the product are sensitive
to knocks and blows. Avoid dropping it.
• No parts of the product can be replaced,
or repaired. The whole product must be
discarded if any part is damaged.
• The power cord on this product is not
replaceable, if damaged discard the
complete product.
• Do not use the product in a bathroom,
or in damp or wet areas.
• The light source is not replaceable. Discard
the product if the light source stops working.
• Switch off the product before cleaning.
• Only clean the product with a dry cloth.
Do not use detergent or any other liquid
to clean electrical parts.
• Do not touch the power cord or the plug
with wet hands or wet parts of your body.
ELECTRICAL SAFETY
New installations and extensions to existing
systems should always be carried out by
an authorised electrician. If you have the
necessary experience and knowledge
(otherwise contact an electrician), you can
replace power switches and wall sockets,
fit plugs, extension cords and light sockets.
Incorrect installation can result in fatal injury
and the risk of fire.
SYMBOLS