EN
24
– Mode 03: Open on 8:00 am to 5:00
pm on Monday, Wednesday, Friday
and Sunday.
– Mode 04: Open on 8:00 am to 5:00
pm on Tuesday, Thursday, Saturday.
– Mode 05: Open on 8:00 am to 5:00
pm on Saturday and Sunday.
– Mode 06: Open on 8:00 am to 5:00
pm on Monday to Friday.
9. Press the Heating Button(8)or (13)on
Remote control to start the product.
Setting the hours and minutes
1. Press the button (14) to set the clock to set
the hours. The hours setting flashes.
2. Set the hours with the + (12) and - (17)
buttons.
3. Repeat steps 1 and 2 for minutes.
4. Repeat steps 2 and 3 to set the stop time
for period 1.
5. Press the button to set the clock. The start
time for period 2 (M2) is shown.
6. Repeat steps 2 to 5 to set the time for
period 2.
Set the day of the week and timer
1. Press the button (14) to set the clock.
The setting to start the clock for period 1
(M1) for Tuesday is shown.
2. Repeat the previous steps to make the
required settings for the other days of the
week.
When the settings for the day are confirmed
the timer mode closes if no buttons are
pressed on the remote control for 10 seconds.
The product returns to normal run mode.
3. Activate timer settings by pressing the
timer button (19) until the timer symbol is
shown on the display.
NOTE:
Timer mode can only be activated if the time
and week day are set.
MAINTENANCE
CLEANING
• Clean the outside of the product with a
soft cloth, moistened with water and a
mild detergent.
• Make sure that no water or any other
liquid gets into the electrical parts – risk of
fire and/or electric shock.
• Remove dust and dirt by carefully vacuum
cleaning the grille on the product.
NOTE:
• Switch off the product and pull out the
plug before cleaning.
• Allow the product to cool before
handling and/or cleaning.
• Do not use strong detergent or solvent,
this can damage the plastic parts.
REPLACING BATTERIES IN REMOTE
CONTROL
1. Place the remote control with the back
up and press the catch in the left edge of
the battery holder to the middle of the
remote control.
2. Pull out the battery holder.
3. Insert a new CR 2025 battery and press
the battery holder in place.
OVERHEATING PROTECTION
The product has over heating protection that
automatically switches off the product if it
overheats, for example if there is a blockage
in the outlet. The product starts automatically
when it has returned to normal temperature
and the blockage has been removed.
