EN
12
AFTER INSTALLATION IN LIGHTS
WITH ELECTRONIC ACTUATOR
Conventional T8 strip light
A = Electronic actuator.
FIG. 5
LED strip light
1. Remove the electronic actuator (B) as
shown in the diagram.
2. Connect a direct wire between pin 2 and 3
on the light.
3. Connect pin 1 to the mains phase (L) and
pin 4 to neutral (N).
B = Electronic actuator.
FIG. 6
Summary of Contents for 012969
Page 3: ...1 3 2 4 ...
Page 4: ...5 6 A B ...