EN
53
24 HOURS mode
– Red LED constant.
Interval ventilation
– Red and green LED go on alternately
one second each.
SLEEP mode
– Green LED goes on for two seconds.
Dehumidification mode
– Red LED goes on for two seconds.
ADJUSTING THE SPEED FOR QUIET
MODE
The standard air flow setting is: 83/72 m
3
/h
(Ø125/Ø100).
On the control panel
Press
+
to increase or
–
to reduce the fan
speed. To show the actual speed, press the
+
or
–
button once.
On the remote control
Under
SILENT
, press
+
to increase, or
–
to
reduce the fan speed. To show the actual
speed, press the
+
or
–
button once.
Air flow (m³/h)
ADJUSTING THE SPEED FOR
MAXIMAL MODE
The standard setting is air flow 97/82, m
3
/h (Ø
125/Ø 100).
On the control panel
Press in the MODE button and press + to
increase, or
–
to reduce the fan speed. On
the remote control: Under MAX, press
+
to
increase, or
–
to reduce the fan speed.
To show the actual speed, press in the MODE
button and press the
+
or
–
once.
ACTIVATION AV DEHUMIDIFICATION
MODE
If the humidity increases, the fan speed
increases to remove damp air. When the
humidity has stabilised the timer starts the
countdown and the fan runs for the set time.
The fan then returns to the previous mode.
Activate the dehumidification mode by
pressing the
HUMIDITY MODE
button on the
control panel or the
SILENT
and
MAX
buttons
on the remote control. Press the
HUMIDITY
MODE
button once to show the current setting.
NOTE:
The humidity is considered to have stabilised
when it has not changed by more than 3% for
5 minutes.
Air flow (m³/h)
Summary of Contents for 012958
