EN
16
Speed
2300 rpm
Noise level
34 dB
INSTALLATION
The product is intended for installation in
a wall or ceiling, for connection to round
ventilation ducts.
1. Switch off the power supply.
FIG. 1
FIG. 2
2. Remove the front cover from the product.
FIG. 3
3. Mark out and drill the mounting holes.
FIG. 4
FIG. 5
4. Fasten the product with screws.
FIG. 6
5. Connect the wires to the terminal block.
FIG. 7
6. Connect the power supply.
DESIGNATIONS IN WIRING
DIAGRAM
L
Live wire
N
Neutral wire
QF
Automatic fuse
S
External power switch
MAINTENANCE
1. Switch off the power supply.
FIG. 8
2. Remove the front cover.
FIG. 9
3. Clean the product with a cloth moistened
with water and a mild detergent.
FIG. 10
4. Clean the fan blades with a paintbrush.
FIG. 11
5. Rinse the front grille under running water.
Wipe the surface dry.
FIG. 12
6. Fit the front grille.
FIG. 13
7. Connect the power supply.
NOTE:
• Make sure no water gets into the
electrical components.
• Maintenance should be carried out at
least once every 6 months.
Summary of Contents for 012895
Page 3: ...1 2 5 6 3 4 QF L N...
Page 4: ...7 10 11 QF L N S QF L N S 8 QF L N 9...
Page 5: ...12 13...
