EN
8
Incorrect installation can result
in fatal injury and the risk of
fire.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Only intended for indoor use.
Safety class II.
Recycle a discarded product
in accordance with applicable
regulations.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Output
Max 40 W
Socket E27
Safety class
II
For light sources with energy class
A++ to E
Cord length
150 cm
DESCRIPTION
Included assembly parts.
FIG. 1
INSTALLATION
See illustrations for the assembly instructions.
FIG. 2 - 8
SAFETY INSTRUCTIONS
• Only intended for indoor use.
• Do not connect the product to
the mains while it is still in the
pack.
• Disconnect the power supply
before installation.
• Do not insert or remove the
light source when the product
is connected to the mains
supply.
• Check that the bulb socket has
a light source before switching
on the mains power supply.
• The power cord on this product
is not replaceable, if damaged
discard the complete product.
• Pay attention so that no
concealed cables are damaged
in connection with installation.
WARNING!
New installations and
extensions to existing systems
must always be carried out by
an authorised electrician. If you
have the necessary experience
and knowledge (otherwise
contact an electrician), you may
replace power switches and
wall sockets, fit plugs, extension
cords and light sockets.
Summary of Contents for 009110
Page 3: ...1 2 3 ...
Page 4: ...4 5 6 8 7 ...