EN
20
TROUBLESHOOTING
Problem
Possible cause
Action
No light.
No power supply.
Check that the plug is plugged
in and that the power point is
supplied with voltage.
The product needs resetting.
Switch off and start the product
with the power switch.
The projection surface is too
dark, or the surrounding light
is too bright.
The best effect is on a light
surface in the dark.
The product is not correctly
aligned.
Point the product at the
projection surface.
Low ambient temperature.
Allow the product to warm up
for 1 to 10 minutes.
The product tips over, or leans.
The product is not correctly
mounted on the ground spike.
Adjust the product to the
required position and tighten
the knob.
The product is not on a level
surface.
Place the product on a level
surface.
Summary of Contents for 002-524
Page 3: ...1 1 2 3 4 5 6...
Page 4: ...2 3...
