Ansel AW-111 Series, User Manual

Page: 6 / 84

Network Camera User’s Guide
6/84
Overview
This user’s guide explains how to operate the Network Camera from a computer. User
should read this manual completely and carefully before you operate the device.
Introduction
This camera is an inexpensive and fully scalable surveillance device. Because the
Network Cameras can be plugged into your existing local area network (LAN), you will
potentially save thousands of dollars from unnecessary cabling.
The device is accessible via the LAN or Internet connection. Connect your device
directly to a local area network or xDSL modem, and with Microsoft® Internet Explorer
you get instant, on demand video streams. Within minutes you can set up the device to
capture a video sequence to a PC. The live video can be uploaded to a website for the
world to see.
Features
z
Easy installation with setup wizard
z
Dynamic IP Service, DIPS®, to search your IP camera from Internet
z
MPEG4 and JPEG video compression simultaneously
z
Multi-profile encoder
z
UDP / TCP / HTTP protocols selectable
z
IEEE 802.11b/g wireless LAN (WLAN model)
z
WEP/WPA/WPA2-PSK wireless security (WLAN model)
z
3GPP for 3G mobile remote application
z
30 fps for all resolutions
z
Built-in 6 IR LEDs for night mode or low Lux. environment
z
Built-in microphone
z
Digital zoom
z
Two-way audio
z
Intelligent motion detection
z
Voice alerting while motion triggered
z
Image transmission using an FTP or e-mail for event
z
DDNS and PPPoE
z
Support UPnP device discovery and NAT router transversal