background image

Network Camera User’s Guide 

 /84 

3

Declaration of Conformity 

 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two 
conditions:  
(1) this device may not cause harmful interference, and   
(2) this device must accept any interference received, including interference that may cause 
undesired operation.   
 
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no 
change to the antenna or the device is permitted. Any change to the antenna or the device could 
result in the device exceeding the RF exposure requirements and void user’s authority to operate 
the device. 
 

 
 

NOTICE TO USERS 

 

© 2006~8 All rights reserved. This manual or the software described herein, in whole or in part, 
may not be reproduced, translated or reduced to any machine readable form without prior written 
approval.  

WE PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE 
OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY 
DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR 
ANY PARTICULAR PURPOSE WITH REGARD TO THIS MANUAL, THE SOFTWARE OR 
SUCH OTHER INFORMATION.  IN NO EVENT SHALL WE BE LIABLE FOR ANY 
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON 
TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH 
THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR 
THE USE THEREOF.   

We reserve the right to make any modification to this manual or the information contained herein 
at any time without notice. The software described herein may also be governed by the terms of a 
separate user license agreement.   

 

Summary of Contents for AW-111 Series





















































































Reviews: