Anritsu MT9083B2, Operation Manual, Page: 27 / 32

3.4 Analyzing Image of Fiber Endface
3-9
3
O
pe
ra
tio
n
If the analysis results of Result, Defects, and Scratches are all PASS, the
total judgment is PASS. If the judgment is FAIL, the parts in trouble are
shown in red in the analysis result.
When the fiber endface is too contaminated or the image is out of focus,
the image cannot be analyzed properly. When the below message is
displayed, clean the connector or adjust the focus of the VIP.
Figure 3.4.1-1 Error Message
Note:
The MX900030A cannot analyze VIP image files acquired by a
microscope other than the G0306A/B.